Friday, March 22, 2013

5 Building a Roombox with a Dremel Trio

Final drawing. Decided on double doors. Not sure about the brackets - will have to experiment with the Dremel Trio router bits. 


The inner frame is now glued together.  Still needs a bit of sanding.

I'm figuring out how to make all the finished parts for the front. I might use Tiny Trim for some of the moldings?





5 comments:

  1. I love the double doors and also those big windows!

    ReplyDelete
  2. I just discovered your blog, it is fabulous! The final drawing is wonderful, I would love to see the building process.
    Greetings, Ilona

    ReplyDelete
  3. Thanks Lucille - I agree about the double doors - I didn't care for the single door & couldn't come up with a good match with muntins (window panes/grille) pattern in relation to the large windows & the transom.

    Iiona - thanks for the compliments & thanks for joining by blog, welcome!

    ReplyDelete
  4. Love the facade, so elegant. The double doors are clearly the right thing for it! I do like the brackets. Would be nice if you could show how you make them, I have no doubt that you will succeed!
    Maybe the way Elga showed how she made dividers for the Pennsylvania Secretary, by glueing a stack of slices of wood at one end and shaping them at the other, then trimming them to the correct depth? Elga explains it much better!

    ReplyDelete
    Replies
    1. Thanks Idske - I'm going to check Elga's blog right now!

      Delete