Note: To see all the posts about 'New System', under Labels click New System
Red Front Door
 |
Scratch-built cross-buck door. The cross & the triangles are glued onto a 1/16" wood panel (about the same thickness as the plastic window,) & the panel is fitting into the grooves of the door rails & stiles. I sanded the triangles for a rounded edge.
|
I got an idea for the river rock foundation & front porch...I thought I might use plaster & with an eye-dropper drip the shape of the rocks - kind of like making pancakes. Cross your fingers : )
The Staircase
 |
| Stair construction - the treads & the railing will be walnut, the rest will be white or cream. I'll be using Housework's balusters as I can't seem to make exact duplicates on my wood lathe. |
 |
| Exploded drawing - the construction is similar to a real staircase, with some modifications. The risers are dadoed for strength & to make it easier to attach to the stringers (see next drawing.) The risers are on top of the treads - on a real staircase the riser rest on the stringers. I changed this because it was easier to round off the tread all the way so it returned back to the open stringer (see last drawing.) The riser has a decorative edge as not to show the end grain. The stairs have a 45 degree angle which makes the balusters easier to cut. I'll probably use toothpicks for the dowels. The railing has a groove on the underside to accept the balusters & (spacing) fillets. The stringers are all cut at the same time by setting my mini table saw to 45 degrees & cutting the stringers stacked & taped together on edge using a stop block... |
 |
| Dadoed riser, also showing decorative end grain. |
 |
| Showing tread bullnose wrap around returning near decorative end of riser. That's a nice looking staircase : ) |
