THE REAL THING
 |
| Everything's cut out except for the two back corner posts. On the right are studs, rafters & floor joists. Also one of the rods that holds the walls & roof together. In the foreground are the parts for the back. |
ASSEMBLY
How much does it all weigh?
 |
| Start with left side. |
 |
| Fit front to left side then insert locking rod from top edge. |
 |
| Insert 1st floor. |
 |
| Insert 2nd floor. |
 |
| Fit right side to front & floors. |
 |
| Insert locking rod. |
 |
| Next fit back to sides & floors. |
 |
| Insert left & right locking rods. |
 |
| Fit back roof to sides. |
 |
| Front underside view of back roof. |
 |
| Fit front roof to sides & back roof. |
 |
| Insert locking rod. |
 |
Kit assembled in minutes. (sections are labeled)
|
 |
| This photo shows all the precut studs, rafters & joists. In front of the dollhouse are extra pieces of strip wood for framing the cut outs. |
 |
| Interior mat board. |
 |
| All packed up or all knocked down? |
How much does it all weigh?
Section Ounces
2nd floor 5.5
1st floor 3.75
Left wall 7.5
Right wall 7.5
Front wall 10.5
Back frame 3.5
Roof, front 5
Roof, back 3
46.25 oz. or 2 lbs., 14.5 oz.
Shipping?
Parcel post RI TO CA $11.14
This does NOT include the box & padding.
...On the Verge of a Nervous Breakthrough...
All photos & images created by Mike's Miniatures on this blog are the property of Mike's Miniatures
You may copy them for personal use only
copyright 2012
No comments:
Post a Comment