Friday, April 22, 2016

Display case / roombox

Trying to come up with a simple display case / room box design.



I'm working with 1/10" thick lauan plywood, so I will probably create hollow walls.




3/8" hollow walls...



Lighted frosted plastic ceiling with magnetic electrical connectors.
The plastic should be more diffused so the ceiling will glow white & not actually show any wires or the bulb.



4 comments:

  1. I like it! will the roof be openable either as extra display space or just to put some lights/transformer?

    ReplyDelete
  2. Thanks Idske - I was thinking of using frosted plastic for the ceiling & a light inside the closed roof.
    To make the electrical connection to the ceiling light I will use magnets (no plugs/wires). The transformer will be outside the display case/room box.

    ReplyDelete
  3. This is wonderful. I am not quite much with the internet, but I believe that what I just read is some good material. Thanks for writing such wonderful article. God bless. CBD Oils

    ReplyDelete