Trying to come up with a simple display case / room box design.
I'm working with 1/10" thick lauan plywood, so I will probably create hollow walls.
3/8" hollow walls...
Lighted frosted plastic ceiling with magnetic electrical connectors.
The plastic should be more diffused so the ceiling will glow white & not actually show any wires or the bulb.
I like it! will the roof be openable either as extra display space or just to put some lights/transformer?
ReplyDeleteThanks Idske - I was thinking of using frosted plastic for the ceiling & a light inside the closed roof.
ReplyDeleteTo make the electrical connection to the ceiling light I will use magnets (no plugs/wires). The transformer will be outside the display case/room box.
It will be great!
ReplyDeleteThis is wonderful. I am not quite much with the internet, but I believe that what I just read is some good material. Thanks for writing such wonderful article. God bless. CBD Oils
ReplyDeleteHi Mike, I love this Room Box you're making. What tools do you need to make this, apart from the Dremel? I just bought a cheap copy of a Dremel from Temu for about $20.00 but it arrived without any instructions on how to use all the different drill bits and sanding bits etc.. that came with it. It actually seems to work well and I've worked out how to unscrew the nut so I can change the different bits and pieces, but could you possibly give me some advice on how to use it properly? I totally understand if you can't, but I thought I'd ask anyway. Thanks Mike. Cheers from Amanda Jones in Australia xox
ReplyDelete